RC201
+
  • RC201

Online residual chlorine/total chlorine monitoring instrument



The GNST-CL201 online residual chlorine/total chlorine detector uses DPD colorimetric method to detect the concentration of residual chlorine. It is an instrument with accurate measurement, high cost-effectiveness, and low maintenance, suitable for measuring residual chlorine during chlorination disinfection and monitoring residual chlorine concentration in drinking water pipe networks. The reagent usage for continuous operation for 30 days (based on a 5-minute measurement cycle) enables unmanned operation with low operation and maintenance costs.
This product is generally suitable for residual chlorine measurement in chlorine disinfection processes such as tap water, circulating cooling water, and sewage, as well as residual chlorine measurement in tap water pipelines.

 

Product Features



  1. Continuous operation for 30 days without the need to replace reagents, simple operation, and low maintenance costs.

  2. Measurement modes: continuous measurement mode, periodic measurement mode (measurement cycle can be set).

  3. Equipped with automatic cleaning function, reducing maintenance workload.

  4. It has data storage function.

 

Product parameters


Name

Parameter

measuring range 

0~10mg/L

test method 

DPD colorimetric method

Accuracy

0-5mg/L: ± 5% or ± 0.03mg/L, whichever is greater, 5-10mg/L: ± 10%

Detection limit

0.03mg/L

monitor

70mm x 48mm LCD display

correcting

Use default calibration curve

Operating conditions

Sample flow rate: 200-400mL/min, sample inlet pressure: 0.1-5bar, sample temperature: 5-40 ° C

Source electricity

220-230VAC,50/60Hz

output

4-20mA

communication

MODBUS RS485

Storage temperature range

-15°C~60C

Storage humidity

10-90%, non condensing

Instrument size

350mm * 186mm * 460mm (length * width * height)

weight

9KG

 

Keywords:

RC201

Related Downloads

RC201
+
  • RC201

RC201

GENSITE online residual chlorine/total chlorine detector is suitable for secondary water supply, swimming pools and hot springs in water plants, and hospital sewage.

Applications


Get A Quote

If you have any suggestions, please leave a message or send an email to us, and we will reply to you within 1 working day after receiving the message email.

Submit

Related Products

Nitrate Sensor

GENESITE Nitrate Sensor in the range of 0.1...14000ppm with RS485 Modbus RTU protocol .Nitrate sensor with ATC functions .

Oil in Water Sensor

GENESITE Oil in Water Sensor in the range of 0...50ppm with RS485 Modbus RTU protocol .The sensor with self-cleaning functions .

Chlorophyll Sensor

GENESITE Chlorophyll Sensor in the range of 0...500ug/L with RS485 Modbus RTU protocol .Chlorphyll sensor with self-cleaning functions .

Chroma Sensor

GENESITE Chroma Sensor in the range of 0...500 PCU with RS485 Modbus RTU protocol .The sensor with self-cleaning functions .
< 1...394041...43 >