Specifications
| BOD sensor | |
| Measuring range | 0...1400mg/L |
| Principle | Two light sources,UV254 |
| Resolution | 0.01mg/L |
| Accuracy | ±5%FS |
| Communication Protocol | RS485 Modbus RTU |
| Temperature range | 0-45℃ |
| Pressure range | 0...1bar |
| Process connection | NPT3/4 |
| Protection grade | Ip68 |
| Shell material | 316 Stainless steel |
| Installation | Immersion type |
| Cable length | 5m (standard) |
| Certification | CE |
Sensor installation

Sensor calibration
It is recommended that users be put into use after calibration.
It is recommended to use the laboratory comparison method for calibration when calibrating.
Users are recommended to calibrate the sensor every 1 to 2 months.
Installation site



CE certification

Keywords:
BOD Sensor
Related Downloads
BOD Sensor
GENESITE BOD Sensor in the range of 0...1400mg/L with RS485 Modbus RTU protocol .The sensor with self-cleaning functions .
Contact Us
Applications
Metallurgy, electric power, pharmaceuticals, chemical industry, petroleum, water treatment, food industry, etc
Related Products
GENESITE Ammonia nitrogen Sensor in the range of 0.1...18000ppm with RS485 Modbus RTU protocol .The sensor with ATC functions .
GENESITE Oil in Water Sensor in the range of 0...50ppm with RS485 Modbus RTU protocol .The sensor with self-cleaning functions .
GENESITE Blue-green algae Sensor in the range of 0...300000 cells/mL with RS485 Modbus RTU protocol .The sensor with self-cleaning functions .
GENESITE Transparency Sensor in the range of 0...500 cm with RS485 Modbus RTU protocol .The sensor with self-cleaning functions .