GENESITE Environmental Protection Technology Co., Ltd.
Specifications
| Nitrite sensor | |
| Measuring range | 0.1...14000ppm |
| Principle | Ion-selective method |
| Resolution | 0.01ppm |
| Accuracy | ±5%FS |
| Communication Protocol | RS485 Modbus RTU |
| Temperature range | 0-50℃ |
| Pressure range | 0...1bar |
| Process connection | 3/4,M39*1.5,G1 |
| Protection grade | Ip68 |
| Shell material | PPS,ABS,PC,316L SS |
| Installation | Immersion type |
| Cable length | 5m (standard) |
| Interference | ClO4−,I−,ClO2−,F− |
| Certification | CE |
Sensor installation
Sensor calibration
It is recommended that users be put into use after calibration.
It is recommended to use the two-point method for calibration, usually with 1.000ppm solution calibrate the zero point, then the slopeis determined with the solution of 10.000ppm.
The electrode should be calibrated in fresh solution. The standard solution can be set, and the second standard solution should be larger than the solution to be tested.
Users are recommended to calibrate the sensor every 1 to 2 months.
Installation site
CE certification
Keywords:
Nitrite Sensor
Related Downloads
Nitrite Sensor
Contact Us
Applications
Related Products
SJ-BOD-80S Bod only Laboratory
SAF Coolest v1.3.1.2 设置面板 GAGSD-AGYF-JZZQE-ZAV
无数据提示
Sorry，当前栏目正在更新中，敬请期待!
您可以查看其他栏目或返回 首页