Specifications
| Ion type sensor | |
| Detection paraSensors | Ammonium ion,Nitrate ion,Fluoride ion, Chloride ion,Calcium ion,Copper ion, Sodium ion,Potassium ion,Lead ion,lodide ion |
| Measuring range (ppm) | NH4+(0.1...14000); NO3-(0.1...14000); F-(0.1-1900); Cl-(1.8-35500); Ca2+(0.2-40000); Cu2+(0.064-6400); Na+(0.1-23000); K+(0.04-39000); Pb2+(0.2-20700); I-(0.0064-50000) |
| Principle | Ion-selective method |
| Resolution | 0.01ppm |
| Accuracy | ±5%FS |
| Communication Protocol | RS485 Modbus RTU |
| Temperature range | 0-50℃ |
| Pressure range | 0...1bar |
| Process connection | 3/4,M39*1.5,G1 |
| Protection grade | Ip68 |
| Shell material | PPS,ABS,PC,316L SS |
| Installation | Immersion type |
| Cable length | 5m (standard) |
| Certification | CE |
Sensor installation

Sensor calibration
It is recommended that users be put into use after calibration.
It is recommended to use the two-point method for calibration, usually with 1.000ppm solution calibrate the zero point, then the slopeis determined with the solution of 10.000ppm.
The electrode should be calibrated in fresh solution. The standard solution can be set, and the second standard solution should be larger than the solution to be tested.
Users are recommended to calibrate the sensor every 1 to 2 months.
Installation site



CE certification

Keywords:
Ion Sensor
Related Downloads
Ion Sensor
GENESITE Ion Sensor contains the following ions: NH4+, NO3-, F-, Cl-, Ca2+, Cu2+, Na+, K+, Pb2+, I- etc. The Sensor with RS485 Modbus RTU protocol .
Contact Us
Applications
Metallurgy, electric power, pharmaceuticals, chemical industry, petroleum, water treatment, food industry, etc.
Related Products
GENESITE Membrane method Dissolved oxygen Sensor in the range of 0...20mg/L with RS485 Modbus RTU protocol . Specifically designed for DO monitoring in aeration tanks.
GENESITE Blue-green algae Sensor in the range of 0...300000 cells/mL with RS485 Modbus RTU protocol .The sensor with self-cleaning functions .
GENESITE Transparency Sensor in the range of 0...500 cm with RS485 Modbus RTU protocol .The sensor with self-cleaning functions .
GENESITE Nitrite Sensor in the range of 0.1...14000ppm with RS485 Modbus RTU protocol .The sensor with ATC functions .